OEM Nickle Alloy Forging Bar Monel K500 Reaction Vessel Engine Components

Nickle Alloy Forging Bar:Using forging machinery to apply pressure to metal blanks to cause plastic deformation, thereby obtaining forgings with certain mechanical properties, shape, and size.

Rolling Bar: The process of reducing the cross-section and increasing the length of metal stock by passing it through the gap between a pair of rotating rolls (of various shapes) is known as rolling.

The Differences between Forging Bar and Rolling Bar:

• Forged parts typically have a denser structure than rolled round bar, as evidenced by the detection of porosity in the material through hot acid etching methods.
• Generally speaking, the quality of round bar produced by forging (referring to free forging here) is better than that produced by rolling. This is because forging requires repeated forging to achieve the same deformation as rolling for elongation (forging is free deformation, while rolling is constrained deformation).
• when the length of the round bar is relatively long, it is difficult to produce in one heat with forging (still referring to free forging here). Multiple heating and forging processes are required. In such cases, it is not easy to compare the overall quality differences between forged and rolled round bar.
• If advanced special forging methods (such as foreign advanced constrained forging and three-dimensional forging) are used, the quality of the forged round bar will always be higher than that of the rolled round bar.

Monel K500, is a age-hardenablenickel-copper alloy that combines the corrosion resistanceproperties of Monel 400 with high strength corrosion fatigue and erosion resistance properties. It is precipitation hardenable through theadditions of aluminum and titanium. The chemica composition of It retains the excellent corrosionresistant characteristics of alloy 400.When compared with Monel 400, it has enhanced strength and hardnessafter precipitation hardening. It has approximately three times the yield strength and doublethe tensile strength of alloy 400.It can befurther strengthened oy cold working before the orecipitation hardening. It should be annealed when welded and theweldment then stress relieved before aging.

Important properties:​

• Similar corrosion resistance to Monel 400 but with higher strength and hardness
• Low permeability and non-magnetic at temperatures as low as -101°C (-150°F)
• Able to be age-hardened
• Suitable for seawater applications

Applications:
Typical applications for Monel K500 that take advantage ofhigh strength and corrosion resistance are pump shafts,impellers, propeller shafts, valve components for ships andoffshore drilling towers, bolting, oil well drill collars, andinstrumentation components for oil and gas production.ltis particularly well suited for centrifugal pumps in themarine industry because of its high strength and low corrosion rates in high-velocity sea water.
High Performance Alloys stocks Alloy K500 in a range otcold drawn, annealed and aged, and hot finished andaged. Material can be supplied in random lengths, cut to order or machined to your specifications. Machining includes drilling, turning, tapping, threading, CNC shapes,flanges, and more. Pump shafts, impellers, propeller shafts. Pumps and valves used in the manufacture of perchlorethylene,chlorinated plastics. Valve components for ships and offshore drilling towers. Instrumentation components for oil and gas production. Oil well drill collars. Particularly well suited for centrifugal pumps.Equipment for processes utilising halide or acid catalysts.

MONEL K500 Forms:

• Round wire
• Wire rod or cut lengths
• Flat wire
• Shaped metal wires
• Cable / Strand

Packaging options:

• Coils
• Spools
• Wire rod or cut lengths

Machining:
Nickel based alloys can be difficult tomachinine.However, it should be emphasized that thesealloys can be machined using conventional productionmethods at satisfactory rates. These alloys harden rapidlygenerate high heat during cutting, weld to the cuttingtool surface and offer high resistance to metal removabecause of their high shear strengths. The following arekey points which should be considered during machining operations: capacity/tools/positive cut/lubrication.

Chemical Composition:

Heat Treatment of Finished Products:

Magnetic Characteristics of MONEL alloy K-500:

Recommended Tool Types & Machining Conditions:

Processing Flow Chart:

Hunan Dinghan New Material Technology Co.,Ltd. (DINGSCO) specialized in Nickel Based Corrosion Resistant and High Temperature alloys products which used in the world’s most technically demanding industries and applications.

We have complete advanced technology facilities to produce best quality alloys to meet exacting your specifications such as VIM (Vacuum lnduction Melting) furnace to provide high purity Alloys,ESR (Electro Slag Re-melting) furnace to enhances the structure and purity of the Alloys, and CNC machining equipments (Lathe, Wire cutting, Drilling,Milling) to provide high precision finished products.

We are dedicated to providing our customers with best quality products,fastest possible deliveries, most competitive prices of Nickel Based Corrosion Resistant and High Temperature alloys in bars,rods,forged flanges, valve parts, forged shapes (shafts, discs, blocks, hubs,rings, cylinders and tailor shapes) according to ASTM,ASME,API,AMS, NACE and other industry standards.

We can help you gain a competitive edge in the market by responding to a rush quote in less than 24 hours and even complex requests for price and delivery quotations are responded to within 48 hours.