| Sign In | Join Free | My himfr.com |
|
A professional manufacturer of high-temperature alloy accessories and corrosion-resistant alloy accessories for high-end valves
2 Years
| Ask Lasest Price | |
| Brand Name : | DINGSCO |
| Model Number : | According to customers requirements |
| Certification : | ISO 9001:2015,PED 2014/68/EU,API 6A,API-20B,TSG,NORSOK |
| Price : | Negotiable |
| Payment Terms : | T/T |
| Supply Ability : | Negotiable |
| Delivery Time : | (Sample Order) 7 days |
Nickle Alloy Angle Bar, or angle iron, is basically manufactured by hot-rolled high strength Nickle Alloy steel. It has L-cross shaped section with two legs - equal or unequal and the angle would be 90 degree. Structural steel angles have lots of dimensions to comply with your uses. In addition, bespoke sizes are available. I
Many Uses:
Monel 400 (UNS NO4400/W.Nr. 2.4360) is a nickel-copper alloy (about 67% Ni- 23% Cu) that is resistant to sea water and steam at high temperatures aswel as to salt and caustic solutions. Aloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloyexhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowingbrackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to avariety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions
Chemical Composition:
| Element | C | Si | Mn | S | Cu | Fe | Ni+Co | Co |
| Minimum(%) | - | - | - | - | 28 | - | 63 | - |
| Max(%) | 0.3 | 0.5 | 2 | 0.024 | 34 | 2.5 | 70 | 2 |
Nature:
| State | Approximate tensile strength (N/mm²) | Approximate Operating Temperature(°C) |
| Annealing | 400-600 | -200 to +230 |
| Elastic tempering | 800-1100 | -200 to +230 |
Our QC Activities and Test Methods:
| Chemical Analysis | ASTM E1473ensile | Test | ASTM E8 |
| Hardness Test | ASTM E 10,E 18 | PMl Examination | DINGSCO SOP |
| Ultrasonic NDT | BS EN 10228 | Liquid Penetrant NDT | ASTM E 165 |
| Dimensional and inspection | DINGSCO SOP | Roughness Test | DINGSCO SOP |
| Impact Test | ASTM E 23 | Low Temperature lmpact Test | ASTM E 23 |
| Creep and Stress Rupture Test | ASTM E 139 | Hydrogen Induced Cracking Test | NACE TM-0284 * |
| Inter Granular Corrosion Test | ASTM A 262 * | Sulfide Stress Corrosion Cracking Test | NACE TM-0177 * |
| Pitting and Crevice Corrosion Test | ASTM G 48 * | Macro Etching Test | ASTM E 340* |
| Grain Size Test | ASTM E 112 * |
* Done by state own third party laboratory
Processing Flow Chart:
|
|
